Legacy Products
The resources associated with these products have ceased their development and are no longer supported.
D-Link Systems, Inc. recommends retiring these products and replacing them with products that receive firmware updates.
How do I change the admin password on my DFL Series Firewall?

Step 1: Open the web browser and type the IP address of the firewall into the address bar, and press Enter. Default IP address for the firewall is:

DFL-210/260/800/860/1600: 192.168.1.1
DFL-260E/860E/1660: 192.168.10.1

Step 2: The default username is admin (all lower case) and the password is admin (all lower case). Click on OK.

Step 3: Click on the plus sign next to User Authentication, select Local User Databases, and then select AdminUsers.



Step 4: Select the admin folder, enter your new password in the Password field and confirm the new password by re-entering it into the Confirm Password field. Click on OK.



Step 5: Click on the Configuration tab and select Save and Activate from the dropdown menu. Click on OK to save and activate the changes. Log back into the unit with your new admin password when promted.