Legacy Products
The resources associated with these products have ceased their development and are no longer supported.
D-Link Systems, Inc. recommends retiring these products and replacing them with products that receive firmware updates.
What do the different LED status lights mean on the DCH-S150

The tollowing chart contiains the different status for the LED indicator on the DCH-S150 Wi-Fi motion sensor:

 

WPS

Blinking Green

Press for one second to start the WPS connection process. The Power/Status LED will start to blink green.

Reset

Solid Red

Press and hold until the Status LED turns red in order to reset the device back to the factory default settings (for about 10 seconds).

Power/Status LED

Solid Green

The DCH-S150 is successfully connected to your network.

Blinking Green

The WPS process is in progress.

Blinking Orange

The Motion Sensor is not properly connected with your wireless network.

Solid Red

The Motion Sensor is powering on, attempting to upgrade firmware, or the device is defective.

Off

If the DCH-S150 will not power on, try plugging the device into another outlet.

Motion Sensor

PIR (Passive Infrared) sensor for detecting motion.