Step 1: Open a web browser and type the IP address of the WBR router into the address bar (default is 192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click on the Setup tab along the top and then click on Network Settings on the left hand side.



Step 4: Under Router Settings, type in the router's new IP address and subnet mask. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

Step 5: Click on the Save Settings button to save your settings.