Legacy Products
The resources associated with these products have ceased their development and are no longer supported.
D-Link Systems, Inc. recommends retiring these products and replacing them with products that receive firmware updates.
How do I set my DWL-2100AP or DWL-2200AP to obtain an IP address automatically (DHCP)?

To change or obtain an IP address automatically for the DWL-2100AP follow the steps below:

Step 1 Log into the web-based configuration by typing in the IP address of the DWL-2100AP (default: in your web browser. The username is admin (all lowercase) and the password is blank (nothing).

Step 2 Click on the Home tab and then click LAN.

Step 3 Select Dynamic IP Address from the drop down box if you want the access point to receive an IP address automatically from a DHCP server or router, otherwise change the IP address manually (static).

We strongly suggest using a static IP address. The IP address is not used for networking, only for configuration.

Step 4 Click the Apply button and click Continue to restart the DWL-2100AP.