Legacy Products
The resources associated with these products have ceased their development and are no longer supported.
D-Link Systems, Inc. recommends retiring these products and replacing them with products that receive firmware updates.
How do I enable Super G Mode on my DWL-2100AP, DWL-2200AP, or DWL-7100AP?

Step 1 Open your web browser and type the IP address of the access point in the address bar. The default IP address is 192.168.0.50. At the login, enter your username (admin) and password (default password is blank).

Step 2 Click on the Advanced tab and then click Performance on the left side.

Step 3 Next to Super Mode, select the mode you would like to use from the drop-down menu.

  • Disabled
  • Super G without Turbo
  • Super G with Dynamic Turbo
  • Super G with Static Turbo

Step 4 Click Apply and then click Continue to save your settings.