Legacy Products
D-Link Systems, Inc will no longer be supporting products listed on this website. The resources associated to these products have ceased their development stage and are no longer supported. By using these resources, you have agreed that they are available for use at your own risk.
How do I save/load the configuration file of my DI series wireless router?

Step 1 Open a web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter.

Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 3 Click the Tools tab and then click System to the left.

Step 4 To save the configuration settings of your wireless router, click the Save button next to Save Settings To Local Hard Drive.

To load a previously saved configuration file, click the Browse... button next to Load Settings From Local Hard Drive. Once you have located the file (config.bin) on your hard drive, click the OK button and then click Load.

Note: If the firmware on your wireless router has been upgraded/downgraded, do not load configuration files that were saved using a different version of firmware then you currently have installed. This will not work and could damage the unit.