Legacy Products
The resources associated with these products have ceased their development and are no longer supported.
D-Link Systems, Inc. recommends retiring these products and replacing them with products that receive firmware updates.
How do I switch to the 5.0Ghz wireless radio on my DIR-628?

Note: This FAQ applies to the DIR-628 only

Step 1: Open your web browser and type in the IP address of the router (192.168.0.1 by default).



Step 2: Enter the username (admin) and password (blank by default), and then click Ok or Log In .



Step 3: Click on the Setup tab and Wireless Settings on the left hand side. Next click Manual Configuration.



Step 4: Click the 5.0GHz radio button and click Save Settings.